Official Series Description


Lab Data Summary

Aggregate lab data for the MINE OR QUARRY soil series. This aggregation is based on all pedons with a current taxon name of MINE OR QUARRY, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to MINE OR QUARRY were used in the calculation. Source: KSSL snapshot (updated 2020-03-18). Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

There are insufficient data to create the lab data summary figure.


Water Balance

Monthly water balance estimated using a leaky-bucket style model for the MINE OR QUARRY soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

There are insufficient data to create the water balance bar figure.



There are insufficient data to create the water balance line figure.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the MINE OR QUARRY series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot (updated 2024-02-21), parsed OSD records (updated 2023-10-06) and snapshot of SC database (updated 2023-10-02).

There are insufficient data to create the sibling sketch figure.

Select annual climate data summaries for the MINE OR QUARRY series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data (updated 2023-10-09).

There are insufficient data to create the annual climate figure.

Geomorphic description summaries for the MINE OR QUARRY series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records (updated 2023-10-04).

There are insufficient data to create the 2D hillslope position figure.

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Competing Series

Soil series competing with MINE OR QUARRY share the same family level classification in Soil Taxonomy. Source: parsed OSD records (updated 2023-10-06) and snapshot of the SC database (updated 2023-10-02).

There are insufficient data to create the competing sketch figure.

Select annual climate data summaries for the MINE OR QUARRY series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data (updated 2023-10-09).

There are insufficient data to create the annual climate figure.

Geomorphic description summaries for the MINE OR QUARRY series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records (updated 2023-10-04).

There are insufficient data to create the 2D hillslope position figure.

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Soil series sharing subgroup-level classification with MINE OR QUARRY, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database (updated 2023-10-02).

This figure is not available.

Block Diagrams

No block diagrams are available.

Map Units

Map units containing MINE OR QUARRY as a major component. Limited to 250 records.

Map Unit Name Symbol Map Unit Area (ac) Map Unit Key National Map Unit Symbol Soil Survey Area Publication Date Map Scale
Mine or quarry9975384616914861ts42ne02519811:20000
Mine or Quarry997511843418x9n1ne03119951:24000
Mine or quarry997510016911271trrhne06720001:12000
Mine or quarry99758816918231tsgyne09519701:20000
Mine or quarry99752116915841ts77ne09719841:20000
Mine or quarry997531316913701ts0bne10919771:20000
Mine or quarry997537816916791tsb9ne12719831:20000
Mine or quarry997510716916251ts8kne13319691:15840
Mine or quarry997520816910591trp9ne14719671:20000
Mine or quarry997552217110551vfhbne15320071:12000
Mine or quarry99754022192702dhbcne15519951:12000
Mine or quarry9975106618531nrmmne16119921:20000
Mine or quarry99751416924331tt3mne16919651:20000
Mine or quarry99756434433gl1zne17319661:20000
Mine or quarry9975469395645f8prne17720001:12000
Mine or quarry99754616920301tspmne18119671:20000

Map of Series Extent

Approximate geographic distribution of the MINE OR QUARRY soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry (updated 2023-10-04).